- ページ 9

電動工具 Makita 4350FCTのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita 4350FCT 13 ページ。 Jig saw
Makita 4350FCT にも：仕様 (2 ページ), 部品内訳 (3 ページ), 取扱説明書 (13 ページ), 技術情報 (14 ページ), 取扱説明書 (13 ページ)

ページを印刷する

The dust nozzle can be installed on either left or right

side of the base.

Then connect a Makita vacuum cleaner to the dust

nozzle.

008019

CAUTION:

If you try to remove the dust nozzle forcibly, the

•

hook of the dust nozzle can be diminished and

removed unintentionally during operation.

Rip fence set (optional accessory)

CAUTION:

Always be sure that the tool is switched off and

•

unplugged

before

accessories.

Straight cuts

008020

008021

When repeatedly cutting widths of 160 mm or less, use

of the rip fence will assure fast, clean, straight cuts. To

install, insert the rip fence into the rectangular hole on

the side of the tool base with the fence guide facing

down. Slide the rip fence to the desired cutting width

position, then tighten the bolt to secure it.

1. Dust nozzle

2. Hose for

vacuum cleaner

installing

removing

1. Rip fence

1. Hex wrench

2. Bolt

3. Fence guide

Circular cuts

008022

008023

When cutting circles or arcs of 170 mm or less in

radius, install the rip fence as follows.

Insert the rip fence into the rectangular hole on the

side of the base with the fence guide facing up.

Insert the circular guide pin through either of the

two holes on the fence guide. Screw the threaded

knob onto the pin to secure the pin.

Now slide the rip fence to the desired cutting

radius, and tighten the bolt to secure it in place.

Then move the base all the way forward.

NOTE:

Always use blades No. B-17, B-18, B-26 or B-27

•

when cutting circles or arcs.

Guide rail adapter set (accessory)

008024

When cutting parallel and uniform width or cutting

straight, the use of the guide rail and the guide rail

adapter will assure the production of fast and clean cuts.

To install the guide rail adapter, insert the rule bar into

the square hole of the base as far as it goes. Secure the

bolt with the hex wrench securely.

1. Fence guide

2. Threaded knob

3. Circular guide