- ページ 3

電動工具 Makita 4399DのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita 4399D 12 ページ。 Cordless equine rasp

14.

REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to

see that keys and adjusting wrenches are removed from

tool before

turning

on.

15.

AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger

on switch. Be sure switch is OFF when plugging in.

16.

OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only

extension cords intended for use outdoors and

marked.

17.

STAY ALERT. Watch what you are doing, use common sense. Don't operate

tool when you are tired.

18.

CHECK DAMAGED PARTS. Before further use of the tool, a guard or other

part that is damaged should be carefully checked t o determine that it will

operate properly and perform its intended function. Check for alignment of

moving parts, binding of moving parts, breakage of parts, mounting, and

any other conditions that may affect its operation. A guard or other part

that is damaged should be properly repaired or replaced by an authorized

service center unless otherwise indicated elsewhere in this instruction

manual. Have defective switches replaced by authorized service center. Don't

use tool if switch does not turn it on and off.

19.

GUARD AGAINST ELECTRIC SHOCK. Prevent body contact w i t h grounded

surfaces. For example; pipes, radiators, ranges, refrigerator enclosures.

20.

REPLACEMENT PARTS. When servicing, use only identical replacement parts.

VOLTAGE WARNING: Before connecting the tool t o a power source (receptacle,

outlet, etc.) be sure the voltage supplied is the same as that specified on the

nameplate of the tool. A power source w i t h voltage greater than that specified

for the tool can result in SERIOUS INJURY t o the user - as well as damage to

the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source w i t h

voltage less than the nameplate rating is harmful t o the motor.