- ページ 8

電動工具 Makita 5046DのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita 5046D 12 ページ。 Makita cordless circular saws with dust collection
Makita 5046D にも：技術情報 (7 ページ)

ページを印刷する

1. Specifications

1. Lever

2. Rubber cap

3. Dust cap

1. Lock-off button

2. Switch trigger

ASSEMBLY

1. Clamping screw

1. Hex wrench

2. Shaft lock

Dust collection

001393

CAUTION:

•

Never cut workpieces covered/stained with thinner, gasoline, oil or the

like. If the dust box is stained with them, it may crack, causing an injury to

operator.

This tool is equipped with the dust box to collect dust and cut chips. When the

dust box is about two thirds full, empty its contents. To do so, press the lever

to unlock the dust cap and open it. Tip the rear of the tool down to empty the

dust box.

Cleaner cutting operations can be performed by connecting this tool to Makita

vacuum cleaner. Remove the rubber cap from the dust cap and connect the

vacuum cleaner hose to the dust cap.

Switch action

001409

CAUTION:

•

Before inserting the battery cartridge into the tool, always check to see

that the switch trigger actuates properly and returns to the "OFF" position

when released.

To prevent the switch trigger from being accidentally pulled, a lock-off button is

provided. To start the tool, push in the lock-off button and pull the switch trig-

ger. Release the switch trigger to stop.

CAUTION:

•

Always be sure that the tool is switched off and the battery cartridge is

removed before carrying out any work on the tool.

Removing or installing saw blade

001414

CAUTION:

•

Be sure the blade is installed with teeth pointing up at the front of the

tool.

•

Use only the Makita wrench to install or remove the blade.

To remove the blade, first remove the clamping screw which secures the dust

box, then remove the dust box.

Press the shaft lock so that the blade cannot revolve and use the wrench to

loosen the hex bolt counterclockwise. Then remove the hex bolt, outer flange

and blade.

001430