- ページ 11

ヘアードライヤー Ceriotti EQUATOR 3000のPDF オリジナルマニュアルの翻訳をオンラインで閲覧またはダウンロードできます。Ceriotti EQUATOR 3000 16 ページ。

1V - Automatic

PROGRAMMING THE WORK TIME. Set the work time from 0 to 60 minutes by turning the

knob (C) of the timer clockwise. When the time set has elapsed, the knob goes back to the

"0" position automatically. During operation of the hairdryer hood, it is always

possible to turn the knob to the "0" position, thus using the knob as a main switch.

PROGRAMMING THE TEMPERATURE. Set the desired operating temperature, by turning

the knob (E) of the thermostat clockwise. The orange warning light (B) lit up indicates that

the heating phase is in progress.

The warning light turns off when the temperature set has been reached.

2V - 2 Speed

PROGRAMMING THE WORK TIME. Set the work time from 0 to 60 minutes by turning the

knob (C) of the timer clockwise. When the time set has elapsed, the knob goes back to the

"0" position automatically. During operation of the hairdryer hood, it is always

possible to turn the knob to the "0" position, thus using the knob as a main switch.

PROGRAMMING THE TEMPERATURE. Set the desired operating temperature, by turning

the knob (E) of the thermostat clockwise. The orange warning light (B) lit up indicates that

the heating phase is in progress.

The warning light turns off when the temperature set has been reached.

PROGRAMMING VENTILATION

Set the desired ventilation by turning the knob (D) to position: 1-2 to obtain from minimum

speed to mac speed .

- Gong / Ionic 1

- Egg / Ionic Automatic

- Equator 3000 Automatico

- Diamante 3000 Automatico

- Glob 3000 Automatico

- Hot Wind Automatico

- Gong / Ionic 2

- Egg / Ionic 2V

- Equator 3000 2V

- Diamante 3000 2V

- Glob 3000 2V

- Hot Wind 2V