- ページ 3

ラック＆スタンド CORNING PretiumのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。CORNING Pretium 10 ページ。 Rack-mountable 1u housing hardware

Components

The main components of the Pretium 1U hardware unit are illustrated in Figure 2. Cable and patch

cords can enter from either side of the housing.

Mounting

Bracket

Location for

3-inch

Projection

From Rack

Mounting Bracket

Shown in Standard

5-inch Frontal

Projection Position

3.1

If you are installing a stubbed unit, follow the directions provided with the shipping container to

remove the stubbed unit from its packaging. Place the unit on a work surface to perform the

preliminary work before mounting the unit into a rack.

3.2

Removing the cover is optional but is recommended to ease installation

Step 1:

Open front and rear doors.

Step 2:

Locate the plunger fasteners at the front of the unit under the housing cover and pull out

to release the plungers (Figure 3).

Step 3:

Lift stop latches and slide the cover toward the front until it is clear of the base. Set the

cover aside.

STANDARD RECOMMENDED PROCEDURE 003-649 | ISSUE 5 | JANUARY 2009 | PAGE 3 OF 10

Cable Tie Locations

Removable Door

Lock Plug

Front Tray

Stop Latch

Patch Cord Routing Guides

KPA-1194

Radius Control Guides

Figure 2 — Components (Cover Removed for Clarity)

Plunger Fasteners

Rear Tray

Stop Latch

KPA-1193

Removable Bracket

Figure 3 — Remove Cover