- ページ 4
DVR HIKVISION DS-7216HVI-STのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION DS-7216HVI-ST 9 ページ。 Ds-7200hvi-st series dvr
HIKVISION DS-7216HVI-ST にも： テクニカル・マニュアル (13 ページ)
ページを印刷する
message will appear if there are no recordings found from
the previous 5 minutes. You may also press the Play
button to view the day's recording for the selected
channel.
3. You may also select additional channels for playback
from the channel list on the right hand side of the
Playback interface.
• Using the Front Panel/Remote:
1. Press the PLAY button. This will take you into the
Playback interface.
2. Enter the channel you would like to view recordings for
on the front panel or remote (i.e. press 'SHIFT', the
STATUS light will turn green, then press '1' for channel
1, press '2' for channel 2).
3. Recordings will begin for the selected channel.
Playback from System Log
You may also playback recordings from the System Log.
To playback video from
the System Log:
1. Enter the Log Search
menu by clicking
Menu>
Maintenance >Log
Search.
2. Set Major Type setting to Information.
3. Set Minor Type setting to Start Record or End Record.
4. Set Start Time and End Time.
5. Click the Search button.
6. A list of results with your search criteria will be displayed.
Select the video log to playback and click Play.
7. The recording will begin to play in the Playback interface.
Backup
Recorded files can be backed up to various devices, such as
USB flash drives, USB HDDs or a DVD writer.
To export recorded
files:
1. Enter the Export
Video menu by
clicking Menu >
4
Quick Start Guide - DS-7200HVI-ST Series DVR
Video Export.
2. Select desired
parameters to search
for files to export.
3. Press the Export
button. This will take
you to the Video Search menu.
4. Select the files to export. You may also click the Play
button to verify that these files are indeed the ones you
would like to export.
5. The size of the
currently selected files
is displayed in the
lower-left corner of
the window. Select the
Next button to enter
the Export menu.
6. Select device to export to from drop-down list (USB Flash
Drive, USB HDD, and DVD Writer). If backup device is
not recognized:
•
Click the Refresh
button.
•
Reconnect device.
•
Check for
compatibility from
vendor.
7. Click Start to begin backup process.
8. After the backup process has completed, you may select
the files from your device and click the Play button to
verify that it has been exported successfully.
Note:
Video Player software will automatically be copied
on to the device that the recorded files were exported on.