- ページ 2
電動工具 Makita 5705RのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita 5705R 13 ページ。 165/190/235 mm
Makita 5705R にも： マニュアル (15 ページ), 取扱説明書 (13 ページ), 取扱説明書 (13 ページ), 取扱説明書 (12 ページ), 取扱説明書 (13 ページ), 取扱説明書 (16 ページ), 技術情報 (5 ページ)
ページを印刷する
SPECIFICATIONS
Model
Blade diameter
Max. cutting depth
-1
No load speed (min
)
Overall length
Net weight
Safety class
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
Weight according to EPTA-Procedure 01/2014
Symbols
The followings show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material! In
observance of the European Directive, on
Waste Electric and Electronic Equipment
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for performing lengthways and cross-
ways straight cuts and miter cuts with angles in wood while
in firm contact with the workpiece. With appropriate Makita
genuine saw blades, other materials can also be sawed.
Power supply
The tool should be connected only to a power supply of the same
voltage as indicated on the nameplate, and can only be operated
on single-phase AC supply. They are double-insulated and can,
therefore, also be used from sockets without earth wire.
For public low-voltage distribution
systems of between 220 V and 250 V
For Model 5705R
Switching operations of electric apparatus cause voltage
fluctuations. The operation of this device under unfavor-
able mains conditions can have adverse effects to the
operation of other equipment. With a mains impedance
equal or less than 0.37 Ohms it can be presumed that
there will be no negative effects. The mains socket used
for this device must be protected with a fuse or protec-
tive circuit breaker having slow tripping characteristics.
at 90°
at 45°
5705R
5903R
190 mm
235 mm
66 mm
85 mm
46 mm
64 mm
4,800
4,500
356 mm
400 mm
5.4 kg
7.2 kg
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-5:
Model 5705R
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model 5903R
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model 5103R
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model 5143R
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
2 ENGLISH
5103R
270 mm
100 mm
73 mm
3,800
442 mm
9.3 kg
/II
) : 94 dB(A)
pA
) : 105 dB (A)
WA
) : 95 dB(A)
pA
) : 106 dB (A)
WA
) : 97 dB(A)
pA
) : 108 dB (A)
WA
) : 94 dB(A)
pA
) : 105 dB (A)
WA
5143R
355 mm
130 mm
90 mm
2,700
607 mm
12.5 kg