- ページ 3

電動工具 JAMEC PEM TDR3000のPDF 操作説明をオンラインで閲覧またはダウンロードできます。JAMEC PEM TDR3000 4 ページ。 Tyre inflator
JAMEC PEM TDR3000 にも： 取扱説明書 (4 ページ)

ページを印刷する
BATTERY CHANGE
This inflator requires 2 x AAA batteries. If the voltage of the batteries fall
below 2.6 volts, the battery icon will flash continuously until it shuts down.
If the voltage of the batteries fall below 2.5 volts, the low "LO" battery icon
appears while the power is on and then shuts down automatically. The
batteries must be changed if the battery icon flashes.
1.
Unscrew the battery cap
2.
Slide the batteries into the inflator with the positive
end facing out of the inflator
3.
Replace the battery cap carefully and do not over
tighten
PSI
SCALE CHANGE
32.
Press and hold the scale change button to activate the display, once the
display is activated press and hold the button for 2 seconds to change the
display scale.
Scale
change
TDR 3OOO
button
.
0