- ページ 9

照明器具 Avantes AvaLight-D-SのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Avantes AvaLight-D-S 12 ページ。

Deuterium

screws

For the deuterium bulb replacement please follow step 8 - 11.

For the halogen bulb replacement please follow step 12 - 16.

8. Remove the 2 screws securing the metal ring around the deuterium lamp.

9. Take out the deuterium lamp, caution: lamp may be hot.

10. Fit a new deuterium lamp, caution: do not touch the lamp glass with your bare fingers.

11. Replace the metal ring and replace the 2 screws to secure the deuterium lamp.

12. Remove the 2 screws of the halogen lamp fitting.

13. Take out the halogen lamp fitting.

14. Replace the halogen bulb with new 5W bulb, caution: do not touch the lamp glass with your

bare fingers.

15. Replace the halogen lamp fitting.

16. Replace the 2 screws to secure the halogen lamp fitting.

17. Slide back the front panel into the housing, take care of wires not getting pinched.

18. Turn the light source housing top-up and re-connect the deuterium power connector and

switch connector.

19. Replace the top cover.

20. Replace the 4 screws to secure the top cover.

21. Replace the side covers.

Revision: 1-00

Halogen

screws

www.avantes.com