- ページ 2

電動工具 Makita 6906のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita 6906 8 ページ。 Makita 6906 impact wrench: specifications
Makita 6906 にも：取扱説明書 (13 ページ), 部品内訳 (3 ページ), 取扱説明書 (8 ページ), 取扱説明書 (20 ページ), 取扱説明書 (7 ページ)

ページを印刷する

SPECIFICATIONS

Capacities

Square drive

-1

No load speed (min

)

Impacts per minute

Max. fastening torque

Overall length

Net weight

Safety class

•

Due to our continuing program of research and development, the specifications herein are subject to change without notice.

•

Specifications may differ from country to country.

•

Weight according to EPTA-Procedure 01/2014

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

Read instruction manual.

DOUBLE INSULATION

Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of the European Directive,

on Waste Electric and Electronic Equipment

and its implementation in accordance with

national law, electric equipment that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for fastening bolts and nuts.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

Noise

The typical A-weighted noise level determined accord-

ing to EN62841:

Model 6905B

Sound pressure level (L

Sound power level (L

Uncertainty (K) : 3 dB (A)

Model 6906

Sound pressure level (L

Sound power level (L

Uncertainty (K) : 3 dB (A)

NOTE: The declared noise emission value(s) has been

measured in accordance with a standard test method

and may be used for comparing one tool with another.

NOTE: The declared noise emission value(s) may

also be used in a preliminary assessment of exposure.

Model

Standard bolt

High tensile bolt

) : 93 dB (A)

) : 104 dB (A)

) : 98 dB (A)

) : 109 dB (A)

6905B

M12 - M20

M12 - M16

12.7 mm

1,700

2,000

294 N•m

270 mm

2.8 kg

/II

WARNING:

Wear ear protection.

WARNING:

The noise emission during actual

use of the power tool can differ from the declared val-

ue(s) depending on the ways in which the tool is used

especially what kind of workpiece is processed.

WARNING:

Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (tak-

ing account of all parts of the operating cycle such

as the times when the tool is switched off and when

it is running idle in addition to the trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841:

Model 6905B

Work mode : impact tightening of fasteners of the

maximum capacity of the tool

Vibration emission (a

Uncertainty (K) : 1.5 m/s

Model 6906

Work mode : impact tightening of fasteners of the

maximum capacity of the tool

Vibration emission (a

Uncertainty (K) : 2.0 m/s

NOTE: The declared vibration total value(s) has been

measured in accordance with a standard test method

and may be used for comparing one tool with another.

NOTE: The declared vibration total value(s) may also

be used in a preliminary assessment of exposure.

WARNING:

The vibration emission during

actual use of the power tool can differ from the

declared value(s) depending on the ways in which

the tool is used especially what kind of workpiece

is processed.

WARNING:

Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

off and when it is running idle in addition to the

trigger time).

2 ENGLISH

6906

M16 - M22

M16 - M20

19 mm

1,700

1,600

588 N•m

327 mm

5.6 kg

/II

) : 16.5 m/s