- ページ 6
スピーカー Avantgarde DUO SDのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Avantgarde DUO SD 19 ページ。
ページを印刷する
UNPACKING
UNO SD & DUO SD
Please note the very heavy weight of the speaker system when
unpacking and installing the system! We strongly advise doing this
work only with the help of other persons!
Do not move or carry the speakers by holding the horn assembly.
The horns may get damaged.
1
Place the packaging carton upright, remove the clips and open the
carton.
2
Carefully pull the loudspeaker forward using recessed grips.
3
Carefully lay the loudspeaker on its back.
4
Remove the lower EPP packaging protection.
5
Carefully lift the speaker to the upright position and remove the
EPP packaging protection.
Use a wheel board (minimum size 70 x 70 cm) to transport the loud‐
6
speaker to its listening position. Note that the spherical horns can
be removed by unscrewing them counterclockwise. This makes it
easier to pass through narrow doorways.
UNPACKING
DUO GT
Please note the very heavy weight of the speaker system when
unpacking and installing the system! We strongly advise doing this
work only with the help of other persons!
Do not move or carry the speakers by holding the horn assembly.
The horns may get damaged.
1
Place the packaging carton upright, remove the clips and open the
carton.
2
Carefully pull the loudspeaker forward using recessed grips.
3
Carefully lay the loudspeaker on its back.
4
Remove the lower EPP packaging protection.
Carefully lift the speaker to the upright position and remove the
5
EPP packaging protection.
Use a wheel board (minimum size 70 x 70 cm) to transport the loud‐
6
speaker to its listening position. Note that the spherical horns can
be removed by unscrewing them counterclockwise. This makes it
easier to pass through narrow doorways.
10
11