ページを印刷する
SOLO
SYSTEM SET UP
APPLICATIONS
With its built-in power amplifier and control unit,
the SOLO is very flexible and can be adjusted
to a variety of installations. Besides the standard
operation in stereo mode, it allows for the following
configurations:
• In professional public address applications like
discos, bars, bands etc. The SPL capabilities of
the SOLO offers dynamic headroom.
• In centrally monitored multiroom-High End-
Installations.
• In demanding High-End Home Cinema
Systems with 5 to 7 identical surround speakers,
plus additional subwoofer (SUB225CTRL,
SUB230CTRL or BASSHORN). The SOLO is
compatible to all surround formats.
• Upgrade of an existing Stereo configuration
to a High-End Home Cinema Systems. The
SOLO ideally matches the speed of our big
horn systems and is an ideal match to the
Avantgarde Acoustic UNO/DUO/TRIO
Series.
• In professional studio monitor applications.
With its build-in controls it can be easily fine
tuned and adapted to the most demanding
listening requirements.
GENERAL
The SOLO can be positioned directly in front of
back or side walls. The speakers (both or only one
speaker!) can as well be placed close into corners.
In this case the speakers need to be toed-in and
the subwoofer level needs to be adjusted/reduced
with the LOW EQ attenuator
The controlled dispersion of our spherical horns
will minimize unwanted reflections from back and
side walls.
Version 1.4 – May 25, 2007
-
Ω
GRAPHIC 8
ROOM PLACEMENT IN STEREO MODE
(See graphic 8)
Choose a position of the speakers in your listening
room. Both speakers and your listening seat should
form an approx. equilateral triangle. Ideally each
side of the triangle should be approx. 10 feet
(see GRAPHIC 7).
(3,0m).
Please note that this distance can be significantly
increased or decreased with no problem, if the
speakers are toed-in correctly.
> 2,00 m
O
60
www.avantgarde-acoustic.de
page 13