- ページ 6

電動工具 Makita AN450HのPDF 技術情報をオンラインで閲覧またはダウンロードできます。Makita AN450H 16 ページ。 Pneumatic roofing coil nailer

ページを印刷する

epair

[4] DISASSEMBLY/ASSEMBLY

[4]-3. Driver complete, Cylinder section (cont.)

ASSEMBLING

(2) Mount O rings to Cylinder and Driver complete. Refer to Fig. 8.

(3) Assemble the Cylinder section to Housing set. Refer to the right illustration in Fig. 6.

(4) Insert Driver complete into the Cylinder. Refer to the right illustration in Fig. 6..

(5) Assemble O ring 5 to Housing set. Refer to the left illustration in Fig. 6.

(6) Assemble the Head valve section to Housing set. Refer to Fig. 3.

[4]-4. Magazine

DISASSEMBLING

Refer to Figs. 10 to 12.

Fig. 10

M5x25 Hex socket head bolt (2pcs.)

Single guide

Remove Magazine and Single guide

from the machine by removing

M5x25 Hex socket head bolt (2pcs.).

Fig. 12

M4x8 Pan head screw

Magazine guard

Remove Magazine guard

by removing M4x8 Pan

head screw.

Holder cap (on change plate)

Magazine section can be

disassembled as illustrated right.

Fig. 11

Magazine

Press Change plate until it is attached on the bottom of Magazine.

notch on the bottom of Magazine

awl

Insert awl into the notch on the bottom

of Magazine and lever up Holder cap.

Tension spring 5

Change plate

Rubber plate 6-20

Magazine

Change plate

Holder cap

Tension spring 5

Pick up Holder cap by finger, then remove

the hook of Tension spring 5 from the

hole on the reverse side of Holder cap

using awl.

Magazine

P 6/ 16

Magazine

Magazine guard

Holder cap

Holder cap (on the bottom

of Magazine)