- ページ 6

DVR ALIBI ALI-NVR5332PのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。ALIBI ALI-NVR5332P 8 ページ。

Click Next to save your settings and continue.

In the Wizard 3 Hard Disk (HDD) menu, the HDDs installed in the recorder are listed, showing their Capacity, Status, Free Space, etc.

Usually HDDs will show a Normal status. If any HDD shows an Uninitialized status, it must be initialized (Init) before it can be used.

The screen below shows a single HDD system with Normal Status and maximum Free Space

If any HDD listed shows a status other than Normal (such as, Uninitialized), it must be initialized (Init), which formats it to a usable

condition. To Initialize an HDD:



The initialization process erases all data on the disk.

CAUTION

Check the select box for the HDD(s) you want to initialize.

Click the Init button.

Wait for the operation to complete (this could take several minutes), and then click Next to continue.

In the Wizard 4 Camera Setup menu, you can select add cameras discovered on the local network to your surveillance system. Most

recorders have a limit of how many network cameras can be added to the system. You can also use the recorder to Activate cameras

on the network. A camera must be activated before it can be added.

www.Observint.com

To activate a network camera with the NVR:

Click the Search button to discover the cameras attached to your local network (network to which the recorder is attached).

Scroll through the list of cameras found on the local network, and then check the select box for the cameras you want to

activate.

Click the Activate button. Allow the operation to complete before continuing.

To add a network camera to the NVR:

Click the Search button to discover the cameras attached to your local network (network to which the recorder is attached).

Scroll through the list of cameras found on the local network, and then check the select box for the cameras you want to add.

See above.

Click the Add button. Allow the operation to complete before continuing.

In the Wizard 5 Platform Access menu, you can setup Platform Access, enable DDNS, and/or configure Stream Encryption.

Platform Access is used with the Alibi Witness 2 smartphone app to simplify access and control how others can access the system.

To enable Platform Access for your recorder, check the Enable box (see the screen above). Then follow the on-screen instructions

for activating this service. Refer to the firmware user manual for your recorder and the Alibi Witness 2 user documentation for

instructions on using the platform access feature. You can download these manuals from AlibiSecurity.com/resources.

Enable DDNS enables DDNS (Dynamic Domain Name System) access to the recorder. This feature simplifies access to the recorder,

especially when the IP address of the recorder may change. For more information on setting up a DDNS service for the recorder, refer

to firmware user manual for the recorder. You can download the firmware user manual for your recorder from AlibiSecurity.com/

resources.

Enable Stream Encryption. Stream encryption enables to encrypt the streams for live view, playback, download, backup, etc. To

use stream encryption:

Check the Enable Stream Encryption select box.

Create an encryption password.

The stream encryption password is synchronized with the Alibi Connect service verification code. After enabling the encryption

NOTE

code, the Alibi Connect stream will be forcedly encrypted. Make sure your Alibi Connect service supports stream encryption.