- ページ 10

電動工具 Makita AN613のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita AN613 11 ページ。 Pneumatic coil nailer

ページを印刷する

When the tool is not to be used for an extended period of

time, lubricate the tool using pneumatic tool oil and store

the tool in a safe place. Avoid exposure to direct sunlight

and/or humid or hot environment.

Maintenance of compressor, air set

and air hose

After operation, always drain the compressor tank and the

air filter. If moisture is allowed to enter the tool, it may

result in poor performance and possible tool failure.

► 1. Drain cock

► 1. Air filter

Check regularly to see if there is sufficient pneumatic tool

oil in the oiler of the air set. Failure to maintain sufficient

lubrication will cause O-rings to wear quickly.

►

1. Oiler 2. Pneumatic tool oil

Keep the air hose away from heat (over 60°C, over

140°F), away from chemicals (thinner, strong acids or

alkalis). Also, route the hose away from obstacles

which it may become dangerously caught on during

operation. Hoses must also be directed away from

sharp edges and areas which may lead to damage or

abrasion to the hose.

OPTIONAL

ACCESSORIES

CAUTION:

are recommended for use with your Makita tool

specified in this manual. The use of any other

accessories or attachments might present a risk of

injury to persons. Only use accessory or attachment

for its stated purpose.

If you need any assistance for more details

regarding these accessories, ask your local Makita

Service Center.

•

Nails

•

Air hose

•

Hex wrench

•

Safety goggles

NOTE: Some items in the list may be included in the

tool package as standard accessories. They may

differ from country to country.

MAKITA LIMITED WARRANTY

Please refer to the annexed warranty sheet for the

most current warranty terms applicable to this

product. If annexed warranty sheet is not available,

refer to the

10 ESPAÑOL

These accessories or attachments