- ページ 8
電動工具 Makita AN901のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita AN901 12 ページ。 Construction coil nailer
Makita AN901 にも： 取扱説明書 (20 ページ), 部品内訳 (4 ページ)
ページを印刷する
Hook
005474
005475
The hook is convenient for hanging the tool temporarily.
This hook can be installed on either side of the tool.
CAUTION:
Always lock the trigger and disconnect the hose
•
when hanging the tool using the hook.
Always tighten the hook securing bolt firmly. Loose
•
bolt may cause air leakage from the tool.
Never hang the tool on a waist belt or like.
•
Dangerous accidental firing may result.
Nails
Nail
004310
Handle nail coils and their box carefully. If the nail coils
have been handled roughly, they may be out of shape or
their connector breaks, causing poor nail feed.
Avoid storing nails in a very humid or hot place or place
exposed to direct sunlight.
1. Hook
1
Humid
005382
MAINTENANCE
CAUTION:
Always disconnect the hose before attempting to
•
perform inspection or maintenance.
Never use gasoline, benzine, thinner, alcohol or the
•
like. Discoloration, deformation or cracks may
result.
Maintenance of nailer
Always check the tool for its overall condition and loose
screws before operation. Tighten as required.
005476
With tool disconnected, make daily inspection to assure
free movement of the contact element and trigger. Do not
use tool if the contact element or trigger sticks or binds.
005477
Make sure that the trigger is locked when the change
lever is set to the LOCK position.
8
Hot