- ページ 10
決済ターミナル E-Service NayaxのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。E-Service Nayax 18 ページ。
ページを印刷する
3.
Insert the grommet for the connector cable
Once drilled, fit the grommet into the 22mm hole, as seen in figure 14.
Figure 15
4.
Screw the VPOS/Onyx into the front of the machine
Position the VPOS/Onyx wireless card reader over the newly drilled holes and
screw it in from the back of the machine's door, as seen in figure 16. Ensure
that the card reader is flush with the machine and correctly aligned before
tightening the screws.
Nayax Installation Guide
Figure 14
Figure 16
10