- ページ 13
冷蔵庫 Avanti BCAD680のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Avanti BCAD680 19 ページ。 Avanti products beverage center instruction manual bcad680
ページを印刷するPROBLEMS WITH YOUR BEVERAGE CENTER ?
You can solve many common beverage center problems easily, saving you the cost of a possible
service call. Try the suggestions below to see if you can solve the problem before calling the servicer.
PROBLEM
Appliance does not operate.
Appliance is not cold enough.
Turns ON and OFF frequently.
The light does not work.
Vibrations.
The appliance seems to make too much noise.
The door will not close properly.
TROUBLESHOOTING GUIDE
Not plugged in.
The circuit breaker tripped or a blown fuse.
Check the temperature control setting.
External environment may require a cooler
setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
The room temperature is hotter than normal.
A large amount of contents has been added to
the appliance.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
Not plugged in.
The circuit breaker tripped or a blown fuse.
The fluorescent tube has burned out.
The ballast has burned out.
Light switch is OFF.
Check to assure that the appliance is level .
The rattling noise may come from the flow of the
refrigerant, which is normal.
As each cycle ends, you may hear gurgling
sounds caused by the flow of refrigerant in your
appliance.
Contraction and expansion of the inside walls
may cause popping and crackling noises.
The appliance is not level.
The appliance is not level.
The door was reversed and not properly installed.
The gasket is dirty.
The shelves are out of position.
13
POSSIBLE CAUSE