- ページ 12

超音波ジュエリークリーナー James products 9020 TOUCHのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。James products 9020 TOUCH 20 ページ。 Professional ultrasonic cleaner

ページを印刷する

1. Control Panel and Operations

13. On/Off Button. After powering on, the LED displays

in picture, and the unit is ready with the normal working status. Press On/Off button once and

the cleaning starts. The cleaning stops when the timer counts down to

to be stopped before the timer runs out, press On/Off button.

14.

- Decreasing Button.

a. When Time is used, each pressing reduces the timer by 1 minute.

b. When Temp is used, each pressing reduces the set temperature down to the next level.

c. When

h/min is used, each pressing reduces the solution set time by 20 minutes.

15.

h/min – Solution Usage Timer Set Button. Each time that button is pressed, timer is increased by 20

minutes. For example,

The maximum time that can be set is 9 hours 59 minutes.

16. Temperature Set Button. 5 set temperatures can be selected. Press Temp button to select the temperature

in the following sequence:

40°C or 104°F

17. Timer Quick Set Button. Press Time button, LED display shows

by 5 minutes.

COMMON CLEANING METHODS

Notes on using the basket:

1. The basket reduces the friction between the items and the tank, but a plastic basket absorbs about

30% of ultrasonic energy and reduces the cleaning effect.

2. During cleaning, dirt will come off like smoke and the water will become murky over time.

When "smoke" stops coming, the cleaning is basically done.

indicates that the solution is set to be used for 1 hour and 20 minutes.

45°C or 113°F

50°C or 122°F

which is the default time as shown

55°C or 131°F

. Each pressing increases the time

REGULAR CLEANING

Only tap water is needed.

Suitable Locations:

Jewellery makers, optical labs, biology / chemical labs,

homes, speech therapy clinics, kindergartens/ nursery

schools.

Cleaning Method:

1. Put the items to be cleaned inside the basket and put

the basket inside the tank.

2. Add water to the cleaning tank to a level between

"MIN" and "MAX" lines and above the area to be cleaned.

3. Turn the power switch on. Press Time button to set

the timer to 5 - 10 minutes. Press On/Off button to start

cleaning.

. If the unit needs

60°C or 140°F