- ページ 9

冷蔵庫 Avanti OCR2519SSのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Avanti OCR2519SS 20 ページ。 Outdoor beverage cooler

 CASTER (WHEEL) INSTALLATION

Your Beverage Cooler is designed to either be free standing in a fixed position or moveable using

the casters (included). Follow the instructions below to correctly install the casters.

This unit is very heavy and this

process should not be done by one

person alone. To avoid injury to

yourself and/or damage to the unit

we recommend that you proceed

according to the following steps

using 2 or more persons.

To avoid damage to the unit during

installation, be sure that the area you

are going to be working in is:

• Clean

• Soft stable surface for working

• Flat and level

Lay the cabinet down on a soft stable surface to avoid:

• scratching the unit

• damage to the back panel

Using a Phillips head screwdriver.

Install each caster as shown using four (4) M6 screws for each caster.

Be sure that you install the two (2) casters with brakes in the front of the unit as shown.

Installation Complete.

Carefully stand the unit upright and allow it to stand for a minimum of 2 hours before connecting to

the electrical outlet.

 HANDLE INSTALLATION

Follow the instructions below to correctly install the handle.