- ページ 6

電動工具 Makita BJV180のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita BJV180 13 ページ。 Cordless jig saw
Makita BJV180 にも：部品内訳 (3 ページ), 仕様書 (2 ページ), 取扱説明書 (13 ページ), 取扱説明書 (13 ページ), 技術情報 (13 ページ), 取扱説明書 (18 ページ)

ページを印刷する

Selecting the cutting action

007483

This tool can be operated with an orbital or a straight line

(up and down) cutting action. The orbital cutting action

thrusts the blade forward on the cutting stroke and

greatly increases cutting speed.

To change the cutting action, just turn the cutting action

changing lever to the desired cutting action position.

Refer to the table to select the appropriate cutting action.

Position

Cutting action

Straight line

cutting action

Small orbit

cutting action

Medium orbit

cutting action

Large orbit

cutting action

006376

Switch action

007484

1. Cutting action

changing lever

Applications

For cutting mild steel,

stainless steel and plastics.

For clean cuts in wood

and plywood.

For cutting mild steel,

aluminum and hard wood.

For cutting wood and

plywood.

For fast cutting in

aluminum and mild steel.

For fast cutting in

wood and plywood.

1. Lock-off button

2. Switch trigger

007485

CAUTION:

Before inserting the battery cartridge into the tool,

•

always check to see that the switch trigger

actuates properly and returns to the "OFF" position

when released.

When not operating the tool, depress the lock-off

•

button from A side to lock the switch trigger in the

OFF position.

To prevent the switch trigger from accidentally pulled,

the lock-off button is provided.

To start the tool, depress the lock-off button from B side

and pull the switch trigger.

Tool speed is increased by increasing pressure on the

switch trigger. Release the switch trigger to stop. After

use, always press in the lock-off button from A side.

Lighting up the lamps

CAUTION:

Do not look in the light or see the source of light

•

directly.

To turn on the lamp, pull the trigger. Release the trigger

to turn it off.

NOTE:

Use a dry cloth to wipe the dirt off the lens of lamp.

•

Be careful not to scratch the lens of lamp, or it may

lower the illumination.

ASSEMBLY

CAUTION:

Always be sure that the tool is switched off and the

•

battery cartridge is removed before carrying out

any work on the tool.

Installing or removing saw blade

CAUTION:

Always clean out all chips or foreign matter

•

adhering to the blade and/or blade holder. Failure

to do so may cause insufficient tightening of the

blade, resulting in a serious personal injury.

1. Lock-off button