- ページ 5

ネットワーク・ハードウェア ALIBI ALI-NVR5100P SeriesのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。ALIBI ALI-NVR5100P Series 7 ページ。 Embedded

Click Next after you configured the network parameters. The HDD management Wizard window will open. If a new DVR is shipped

with a pre-configured HDD, nothing needs to be done in this window. If you installed an HDD or replaced the HDD, select (check the

box for) the HDD, then click Init to setup the disk for the DVR. NOTE: Init will erase all data from the disk. When the initialization is

complete, click Next to continue.

In the next window, the Wizard will search the LAN to find compatible cameras to add to the system.

With the ALI-NVR5116P, you can monitor up to 16 IP cameras total (the sum of those attached to ports in the integrated 16-port

Ethernet switch plus those added from the LAN the NVR is attached to).

With the ALI-NVR5132P, you can monitor up to 32 IP cameras total (up to 16 attached to the 16-port Ethernet switch on the back of

the NVR plus up to 16 added from the LAN the NVR is attached to).

www.Observint.com

Check the select boxes for the cameras you want to add, then click the Add button (see above).

On the next screen, you can configure all cameras to begin recording video either continuously, when motion is detected, or not

record (select no options). The recording mode of individual cameras can be configured using the menus in the firmware. See the

ALI-NVR5100P Series Embedded Network Video Recorder User Manual for more information.

Click the star for Continuous or Motion Detection, click Yes in the Attention pop-up window, and then click OK to save the

settings. The Wizard will close and the NVR will present the Live View display. See the ALI-NVR5100P Series Embedded Network

Video Recorder User Manual for more information.