- ページ 2
電動工具 Makita BTL062のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita BTL062 12 ページ。 Cordless angle impact wrench
Makita BTL062 にも： パンフレット＆スペック (2 ページ), 取扱説明書 (20 ページ)
ページを印刷する
ENGLISH (Original instructions)
SPECIFICATIONS
Capacities
No load speed (min
Impacts per minute
Max. fastening torque
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Cd
Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance of European Directive
2012/19/EU on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for fastening bolts and nuts.
Noise
The
typical
A-weighted
according to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Model
Standard bolt
High tensile bolt
Square drive
-1
)
Overall length
Net weight
Rated voltage
noise
level
determined
) : 88 dB(A)
pA
) : 99 dB(A)
WA
END004-5
Vibration
The
vibration
determined according to EN60745:
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
ENE036-1
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
ENG905-1
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
2
TW100D
M8 - M12
M6 - M10
9.5 mm
0 - 2,300
0 - 3,000
110 N･m
163 mm
0.95 kg
D.C. 10.8 V
total
value
(tri-axial
2
) : 8.0 m/s
h
2
ENG900-1
vector
sum)
ENG901-1