ページを印刷する
MAINTENANCE
The appliance should be maintained and cleaned frequently. For your safety,
please pull the plug out of the socket before the cleaning.
1.
Interior maintenance
Clean the interior of the appliance with a cup of warm water and a table spoon of baking soda.
Wet a cloth with the solution and wipe down the interior. Once complete wipe the interior with
a dry cloth.
2.
Maintenance of door gasket
Door gaskets can be damaged by different foods. Please wipe up spills immediately.
3.
Outer maintenance
Wipe the dust away with a clean cloth.
4.
Lighting and its replacement
When the refrigerating chamber door opens, the LED light turns on.
When the light is damaged, please remove the lampshade first and then
replace the LED light.
The specific operations are shown in the following diagram:
1. Please move the lampshade and the thermostat out 3-5mm in the direction of
the arrow.
2. Take out the lampshade and thermostat downwards.
3. Pull the connection terminal, use the screwdriver to remove the LED light
board and replace it.
Note: If the LED lamp is abnormal, it should be replaced by professionals.
Do not dismantle and replace it privately in order to avoid damage.
DEFROST
Defrosting of refrigerator will be executed automatically while the product is operating,
so it is not required for manual defrost. The defrost water flows into the evaporator
plate and the water will be evaporated by the heat of the compressor.
Do not use mechanical devices or other means to accelerate the
Warning
defrosting process, other than those recommended by the manufacturer
10