- ページ 9

電動工具 Makita DBN600のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita DBN600 13 ページ。 Cordless finish nailer
Makita DBN600 にも：取扱説明書 (13 ページ)

ページを印刷する

Nose adapter

CAUTION:

Always make sure that your

fingers are not placed on the switch trigger or

the contact element and the battery cartridge is

removed before installing the nose adapter.

When firing nails on the material with easily-marred

surfaces, use the nose adapter. Put the nose adapter

on the front end of the contact element.

Make sure that the nose adapter completely covers the

front end of the contact element as illustrated.

► 1 . Nose adapter 2. Contact element

You can store the nose adapter on the holder on the

magazine to keep it from being lost.

► 1 . Nose adapter 2. Holder

Hook

CAUTION:

Do not hang the hook from the

waist belt. Dropping the nailer, which is caused by

the hook accidentally coming out of place, may cause

unintentional firing and result in personal injuries.

The hook is convenient for temporarily hanging the tool.

This can be installed on either side of the tool.

To install the hook, insert it into a groove in the tool

housing on either side and then secure it with a screw.

To remove, loosen the screw and then take it out.

► 1 . Groove 2. Hook 3. Screw

OPERATION

Inspecting trigger function

CAUTION:

Make sure that the trigger function

is in working order before each operation. The

tool must not operate only by pulling the trigger

or only by placing the contact element against the

workpiece. If you find such issues, contact Makita

authorized service centers for repairs.

CAUTION:

Before installing the battery car-

tridge into the tool, always check to see that the

switch trigger actuates properly and returns to

the "OFF" position when released.

Driving nails

WARNING:

Continue to place the contact

element firmly on the material until the nail is

driven completely. Unintentional firing may cause

personal injuries.

9 ENGLISH