- ページ 6

電動工具 Makita DCG140のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita DCG140 12 ページ。 Vezeték nélküli szigetelępisztoly
Makita DCG140 にも：取扱説明書 (12 ページ), 取扱説明書 (12 ページ), (ハンガリー語）ユーザーマニュアル (10 ページ)

ページを印刷する

light up for a few seconds.

Indicator lamps

Lighted

Off

NOTE: Depending on the conditions of use and the

ambient temperature, the indication may differ slightly

from the actual capacity.

Speed adjusting dial

Higher speed is obtained when the dial is turned in the

direction of number 5, lower speed is obtained when it

is turned in the direction of number 1.

NOTE:

far as 5 and back to 1. Do not force it past 5 or

work.

ing material, it may not be fed at low speed. In

Remaining

capacity

Blinking

75% to 100%

50% to 75%

25% to 50%

0% to 25%

Charge the

battery.

may have

malfunctioned.

Overload warning lamp

loaded. If the load reaches some point, the lamp keeps

release the trigger and pull the trigger again.

NOTE: Check what causes the overload when the

ter of the nozzle.

Switch action

CAUTION:

tool, always check to see that the switch trigger

position when released.

trigger in the OFF position.

1. Lock lever 2. Switch trigger

the trigger-lock button is provided.

increasing pressure on the switch trigger. Release the

switch trigger to stop.

6 ENGLISH