- ページ 11

ボイスレコーダー JamHub Tracker MT16のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。JamHub Tracker MT16 20 ページ。 Portable multitrack recorder
JamHub Tracker MT16 にも：ユーザーマニュアル (20 ページ), マニュアル (2 ページ)

ページを印刷する

Using the Tracker MT16 Breakout Cable

To gain full access to the Tracker MT16's multitrack recording, you will need to use

the Tracker MT16 Breakout Cable (sold separately). Plug into the jack located next

to the DC Adapter port, and seamlessly connects to your mixing desk through the

Insert Jacks.

SAVE THE MUSIC

How Your Tracker MT16 Saves Files

The Tracker MT16 saves files onto the included SD card. Each channel's recording

is saved as one WAV or MP3 file. Most DAWs will open a WAV and MP3, but be sure

to check with your DAW manufacturer for compatibility. In addition, the Tracker

COMBINED mode will save all tracks recorded in a single WAV file that contains all

the data needed for a multitrack session. COMBINED files will encode more quickly

and are easier to transfer across the web. You can break these files out into their

component pieces on your computer using the breakout utility, which you can learn

more about online at www.JamHub.com/TrackerMT16, or upload them to Bandlab.

Insert Your SD Card

Firmly push your SD card in your Tracker MT16 with the gold connections facing

up and the label facing down.

Formatting Your SD Card

To format a new SD Card for your Tracker MT16, go to SETTINGS, then scroll through

the menu to the Format SD option and press

. Be aware that reformatting

an SD Card will wipe any preexisting data off that card and you will lose any files

previously stored on the SD Card.