- ページ 11

DVR HIKVISION DS-9008HUHI-F8/NのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION DS-9008HUHI-F8/N 17 ページ。

ページを印刷する

1 3

S E T U P R E C O R D I N G ( c o n t i n u e d )



 Motion Detection Areas

To define the image areas that Motion Detection will monitor for each camera, do the following:

Go to MENU > RECORDING CONFIGURATION > MOTION DETECT.

Use Camera pull-down menu to select camera to configure.

Check the Enable Motion Detection checkbox to enable motion detection.

Use the Sensitivity boxes to select how responsive the detection should be (the more green

boxes lit, the greater the sensitivity).

Drag a grid(s) over the area(s) on the image that will be sensitive to motion.

Click the Settings Set button to configure Arming Schedule (when detection is enabled) and

Linkage Actions (what action(s) to take when motion is detected).



















 TYPE

Motion or Continuous (default)

 COLOR

Shows Recording Schedule days:

• Blue=Continuous

• Yellow=Event (motion/alarm)

• Grey=None

 TIMES

Customize schedule times (ignore for

"motion only" recording)

 ADD

Press to add time settings to

schedule

 ENABLE SCHEDULE

If not checked, camera will not record

 CAMERA

Select camera

ENABLE MOTION DETECTION

Click to enable/disable

 MOTION GRID

Draw area that will detect motion

SENSITIVITY

Set green squares for sensitivity (in

example, sensitivity is 3)

 SETTINGS/SET

Arming schedule & linkage actions

APPLY

