- ページ 10

キッチン家電 Avanti BCAD353のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Avanti BCAD353 20 ページ。 Beverage cooler

ページを印刷する

1. Parts and Features

 OPERATING YOUR BEVERAGE COOLER

Do not store food in Beverage Center, as interior temperature may not get cool enough to prevent

spoilage.

As a natural result of condensation, in summer months or areas of high humidity, the glass door

may build up moisture on the outside. Just wipe it away.

It is recommended you install the appliance in a place where the ambient temperature is between 72-

78 ºF (22º - 26ºC). If the ambient temperature is above or below recommended temperatures, the

performance of the unit may be affected. For example, placing your unit in extreme cold or hot

conditions may cause interior temperatures to fluctuate. The range of 34º-43ºF (1º-6ºC) may not be

reached.

Your Beverage Cooler is designed to operate with at a range of 34º - 43º F (1 – 6ºC).

Attention

This unit is equipped with a power delay system to protect the compressor in the event of a

power outage.

•

This power delay system will delay the compressor start cycle for "3" three minutes

both at the first time the unit is plugged in and when there is a power outage.

•

Once the unit is plugged in for the first time or power has been restored to the unit,

the compressor will start cycling after (3) three minutes of uninterrupted power

supply.

•

Digital display, LED Lighting and temperature settings will work as normal and not

be affected.

 ON/OFF POWER

Your unit is designed to turn ON as soon as the power cord has been plugged into an active electrical

outlet.

 Setting the Temperature Control

• Your unit has only one control for regulating the temperature in

the compartment. The temperature control is located on the upper

left hand side of the compartment.

•

The range of the temperature control is from "34ºF" to "43ºF".

• The first time you turn the unit on, press the set button and then

press the

"DOWN" button to set the temperature to "34ºF".

• After 24 to 48 hours, adjust the temperature control to the setting that best suits your needs; by

first pressing the Set button then, pressing the

• To turn the off the cooling system, unplug the unit from the electrical outlet.

NOTE:

•

Also, as cold air falls and warm air rises, there could be a slight temperature variance between

the top and bottom shelves.

 STORAGE

Many bottles may differ in size and dimensions. As such the actual number of bottles you may be able

to store may vary.

IMPORTANT SAFEGUARDS

buttons .