プリンター Lexmark 20G0500 - T 640dtn B/W Laser PrinterのPDF トラブルシューティングマニュアルをオンラインで閲覧またはダウンロードできます。Lexmark 20G0500 - T 640dtn B/W Laser Printer 6 ページ。 Troubleshooting guide
Lexmark 20G0500 - T 640dtn B/W Laser Printer にも： 用紙トレイの積載 (2 ページ), セットアップとインストール (4 ページ)
ページを印刷する
Lexmark™ T64x
Troubleshooting
Guide
Online technical support
Technical support is available on our Lexmark Web
site at www.lexmark.com.
Checking an unresponsive
printer
If the printer is not responding, first make sure:
•
The power cord is plugged into the printer and
a properly grounded electrical outlet.
•
The electrical outlet is not turned off by any
switch or breaker.
•
The printer is not plugged into any surge
protectors, uninterrupted power supplies, or
extension cords.
•
Other electrical equipment plugged into the
outlet is working.
•
The printer is turned on.
•
The printer cable is securely attached to the
printer and the host computer, print server,
option, or other network device.
Once you have checked each of these possibilities,
turn the printer off and back on. This often fixes the
problem.
Printing multi-language
PDFs
1
Open the document you want to print in Adobe
Acrobat.
2
Click the printer icon.
3
Check the Print as image box.
4
Click OK.
Solving printing problems
The operator panel display is blank
or displays only diamonds
Turn the printer off, wait about 10 seconds, and turn
the printer back on.
If the Ready message does not appear, turn the
printer off and call for service.
The message USB device
unsupported appears when using
a USB device
For information regarding tested and approved USB
flash memory devices, see our Lexmark Web site at
http://support.lexmark.com and click on
KnowledgeBase to search for Direct USB printing.
Jobs do not print
The printer is not ready to receive data
Make sure Ready or Power Saver appears on the
display before sending a job to print. Press
return the printer to the Ready state.
The specified output bin is full
Remove the stack of paper from the output bin, and
then press
.
The specified tray is empty
Load paper in the tray.
You are using the wrong printer driver or
are printing to a file
•
Verify you are using the printer driver
associated with the printer.
•
If you are using a USB port, make sure you are
running Windows 98/Me, Windows 2000,
Windows XP, or Windows Server 2003 and
using a Windows 98/Me, Windows 2000,
Windows XP, or Windows Server 2003
compatible printer driver.
Your MarkNet N8000 series internal print
server is not set up properly or is not
connected properly
Verify that you have properly configured the printer
for network printing.
See the drivers CD or the Lexmark Web site for
information.
You are using the wrong interface cable,
or the cable is not securely connected
Make sure you are using a recommended interface
cable.
Make sure the connection is secure.
Held jobs do not print
A formatting error has occurred
•
Print the job. (Only part of the job may print.)
•
Delete the job.
•
Free up additional printer memory by scrolling
through the list of held jobs and deleting others
you have sent to the printer.
to
The printer has insufficient memory
•
Print the job. (Only part of the job may print.)
•
Delete the job.
•
Free up additional printer memory by scrolling
through the list of held jobs and deleting others
you have sent to the printer.
The printer has received invalid data
Delete the job.
Job takes longer than expected to
print
The job is too complex
Reduce the complexity of your print job by
eliminating the number and size of fonts, the number
and complexity of images, and the number of pages
in the job.