- ページ 4

空気清浄機 Airfree Iris 125のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Airfree Iris 125 8 ページ。

Guide for Airfree

installation in mould contaminated rooms

1 - Install your Airfree

2 - Allow your unit to run for at least one week to achieve significant airborne mould spore reduction.

3 - Clean mould infected items and surfaces, since they are a continuous source of new spores.

It is important to stress that Airfree

Those surfaces must be cleaned manually.

Airfree

will destroy airbone moulds, spores and prevents them from contaminating other areas, inhibiting

the growth of existing and new colonies.

Plug power cord into the nearest outlet. Make sure the surface is dry (never place Airfree

wet floor or immerge it in water). Make sure side led light is on. Adjust the night light intensity

with the touch sensor. After 10 minutes the top lid should be warm.

Place Airfree

or behind curtains as it will reduce airflow and Airfree

Check if the area is compatible with the unit capacity to achieve best unit performance. Using

Airfree in rooms larger than its capacity will greatly reduce its purifying capacity.

Airfree

However it is recommended not to place it nearby to avoid potential interference in Airfree

air flow.

Airfree

in connecting rooms.

Airfree

room.

To change top light colours press the sensor on the top of Airfree's logo. Each touch will switch

to the next colour. For the random mode please switch to pink and let it be. Maintaining finger

pressed on the sensor will increase or diminish brighteness.

Airfree

unit in accordance with the user manual

will not destroy or remove mould from an infected item or surface.

on a flat surface not exceeding 75 cm from the floor, not under furniture, shelves,

must be continuously on in the same room, 24 hours a day.

is to be used in rooms with minimum air volume of 10 m

can be installed in rooms equipped with air conditioning and heating systems.

can be placed in corridors but the air sterilisation effects will barely have any effect

shall not be placed near doors or under windows to avoid sterilised air to exit the

and Mould

efficiency in reducing microorganisms.