- ページ 3
プリンター Lexmark 21Z0300 - Laser Printer Government CompliantのPDF クイック・リファレンスをオンラインで閲覧またはダウンロードできます。Lexmark 21Z0300 - Laser Printer Government Compliant 10 ページ。 Lexmark c935: supplementary guide
Lexmark 21Z0300 - Laser Printer Government Compliant にも： 印刷マニュアル (4 ページ)
ページを印刷する
3
Prepare the paper for loading.
•
Flex sheets of paper back and forth to loosen them, and
then fan them. Do not fold or crease the paper. Straighten
the edges on a level surface.
•
Hold transparencies by the edges, and then fan them.
Straighten the edges on a level surface.
Note: Avoid touching the print side of the transparencies.
Be careful not to scratch them.
•
Flex a stack of envelopes back and forth to loosen them,
and then fan them. Straighten the edges on a level surface.
4
Load the paper, and then adjust the paper guides so that they
lightly touch the edges of the paper stack.
•
Load letter, A4, and transparencies with the recommended
print side facedown and the long edge of the paper
entering the printer first.
•
Load A3, A5, B4, folio, legal, and statement paper with the
recommended print side facedown and the short edge of
the paper entering the printer first.
Notes:
–
Adjust the additional paper guide to accommodate
SRA3 and 12 x 19 paper sizes.
–
Do not exceed the maximum stack height by forcing
paper under the stack height limiter.
•
Load envelopes with the flap side up.
Warning—Potential Damage: Never use envelopes
with stamps, clasps, snaps, windows, coated linings, or
self-stick adhesives. These envelopes may severely
damage the printer.
Note: Load only one size and type of paper at a time.
3
5
Make sure the paper is as far into the multipurpose feeder as
it will go with very gentle pushing. Paper should lie flat in the
multipurpose feeder. Make sure the paper fits loosely in the
multipurpose feeder and is not bent or wrinkled.
6
From the control panel, set the Paper Size and Paper Type.
Printing
Printing a document from
Windows
1
With a document open, click File ª Print.
2
Click Properties, Preferences, Options, or Setup.
3
Adjust the settings.
4
Click OK.
5
Click OK or Print.