- ページ 9

チェーンソー Garden Gear D5942のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Garden Gear D5942 17 ページ。 Pole chainsaw

Adjusting the chain tension

Adjust the tension of the chain using the hex key supplied. Replace the

sprocket cover following the above steps, in reverse, tighten the guide bar

screw slightly.

Please note: Hold the chain guide bar with one hand and turn the adjusting

screw clockwise until there is only slight movement in the chain around one

eighth of an inch. Then fully tighten the guide bar screw.

Adjusting the angle

The angle of the power head can be set to three different working positions:

0°, 15° and 30°. Push the adjust button with one hand and turn the power

head around to suitable position. The adjust button will lock automatically.

Adding chain oil

Before using the chain saw it is necessary to add chain oil (supplied) and

after every 10 minutes of use, check the level and top up as required.

Remove the oil cap from the top of the main body. Fill with oil supplied and

replace the cap, ensuring it's securely fastened.

Oil cap