- ページ 17
スピーカーシステム JAMO C 80 SURのPDF パンフレットをオンラインで閲覧またはダウンロードできます。JAMO C 80 SUR 19 ページ。 Jamo c 80 cen: product brochure
JAMO C 80 SUR にも: パンフレット&スペック (8 ページ), オーナーズマニュアル (20 ページ)
![JAMO C 80 SUR パンフレット](/uploads/products/server2/2111365/2111365.jpg)
Finally, the very rigid material ensures that the heavy magnets and the voice coil
always are perfectly aligned with the voice coil, in the exact centre of the magnet
gap.
X-over
As should be apparent from the drive unit descriptions above, we wanted to start
out with drivers of immense fundamental quality, precisely so that we would only
need minimal assistance from the cross-over.
Consequently, the cross-over in the Jamo C 80 is of a relatively simple – in the most
positive sense of the word – low-order confi guration.
The advantages of using what is basically a 2nd order fi lter is that both electrical
and acoustical phase angles are kept at very small values, something that's of great
importance both in terms of sound quality and the eventual load imposed on the
amplifi er.
Cabinets
The design of the C 80 allows the use of large cabinets without the loudspeaker
seeming unduly imposing. Also the arc shape damps standing waves. The cabinet
sides are made of multiple layers of MDF board, high-frequency glued together for
optimum surface contact between them.
The arc-shaped design itself results in a much more rigid panel (compared to a fl at
panel) and to further improve rigidity the cabinet features internal bracings mak-
ing it very inert-sounding, thus preventing undesirable vibrations from colouring
the speaker's output.
The planar design of the cabinet fronts gives optimum working conditions, i.e. a
minimum of diffraction (colouration/distortion particularly in the upper midrange
and treble, due to refl ections from irregularities on the loudspeaker front),
All C 80 cabinets are made of heavy MDF board, a solid and inert base for the driv-
ers to work in.
All the C 80 fl oorstanders are equipped with die-cast aluminium feet to obtain best
possible placement. Using the included spikes – with or without the rubber feet
– secures the speaker fi rmly, something which is essential to obtain maximum per-
formance.
Using the adjustable spikes ensures a good mechanical contact to the fl oor, irre-
spective of the fl oor material underneath. If you prefer to decouple it from the fl oor,
this can be done by using the enclosed rubber absorbers.
17