- ページ 4

DVR HIKVISION ERT-F2042のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION ERT-F2042 14 ページ。

C O N N E C T I N G D E V I C E S

• Connect power supply to DVR and plug into 110 to 240 VAC outlet (surge suppressor recommended).

• Connect DVR to LAN using Cat 5e cable.

• Connect video monitor(s) to DVR using HDMI and/or VGA cables, as appropriate.

• Connect mouse to USB port (wireless mouse can be used in lieu of included mouse).

• Connect to audio I/O using RCA connectors.

• Turn power switch on. Power indicator LED will remain on to indicate unit is starting/on.

S T A R T U P

• Proper startup is crucial to expanding the life of the DVR.

• Check the power supply is plugged into an electrical outlet.

• It is HIGHLY recommended that an Uninterruptible Power Supply (UPS) be used in conjunction with the

device.

• The Power LED should turn green. The unit will start.

A C T I V A T I N G Y O U R D E V I C E

For the first-time access, you need to activate the device by setting an admin password. No operation is

allowed before activation. You can also activate the device via Web browser, SADP, or client software.

1. Enter the same password in the Create

New Password and Confirm New

Password text fields.

2. Enter a different password for IP Camera

Activation (click

password to ensure you enter it correctly).

3. Click OK to save the password and

activate the device.

STRONG PASSWORD RECOMMENDED

We highly recommend that you create a

strong password of your own choosing

(using a minimum of eight characters,

including at least three of the following

categories: upper case letters, lower case

letters, numbers, and special characters) in

order to increase the security of your

product. We recommend that you reset

your password regularly. Especially in high

security systems, resetting the password

monthly or weekly can better protect your

product.

•

Using the Unlock Pattern for Login

You can configure a device unlock pattern for Admin login once the device is activated.

icon to show

Figure 1-1 Set Admin Password

Clear-text password is supported. Click

the password. Click again to hide.

to show