- ページ 5

サブウーファー JAMO SUB 550のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。JAMO SUB 550 9 ページ。 Jamo subwoofer user manual
JAMO SUB 550 にも：パンフレット＆スペック (5 ページ)

Electronics

The important things on subwoofer amplifiers are the ability to deliver high

power – especially peak burst are important to reproduce e.g. an explosion or a

bass drum with full fidelity. This has to be done with a minimum of distortion

and a very tight control of the woofer.

Due to the nature of a normal class AB amplifier we would need to have a very

big power supply since only approx 60% of the power is turned into sound –

the rest is turned into heat. Consequently the heatsinks of these amplifiers

would also have to be enormous in order to cool the amplifiers sufficiently.

On the other hand a class AB amplifier has some excellent qualities – such as

musicality, low distortion and high damping factor.

So, if we could combine these qualities with the efficiency of a Class D amplifier

it would be ideal . . .

Consequently, the development team turned to a specialized technology that

matched our demands perfectly: High power output with high efficiency while

maintaining musicality, low distortion and tight control of the woofer. A

patented technology called BASH®.

The key idea of the BASH technology is based on a continually variable supply

voltage which tends to zero when there is no input signal and reaches its

highest level when the amplification requires power. This supply voltage is

continuously variable but always lower than that of an AB class amplifier and

thus a much higher efficiency is achieved.

The outstanding energy efficiency (85%) achieved by this technology, allows

very high output power, without heating up the amplifier and thus elimination

of the need for excessive heat sinks.

The power supply itself uses a high speed D class unit in order to constantly

supply the amplifier with the appropriate power.

Due to its voltage switching capability a BASH amplifier plays louder than a

conventional amplifier of comparable RMS power. Simply by not being a

voltage limited amplifier it has tremendous dynamic power capability.

Controls & Features

All the subwoofers features volume-, variable phase- and variable cut off

frequency controls to make sure that the sound from the subwoofers can be

adjusted to blend in seamlessly with the sound from the rest of the speakers.

SUB 650 also features a 12V trigger input, so it can be turned on and off from a

A/V receiver/controller that has a 12V output, ensuring that the subwoofer

always will be active when the A/V receiver/controller is turned on.