- ページ 3

プリンター Lexmark 25A0452 - C 736dtn Color Laser PrinterのPDF 印刷マニュアルをオンラインで閲覧またはダウンロードできます。Lexmark 25A0452 - C 736dtn Color Laser Printer 9 ページ。 Color laser printers
Lexmark 25A0452 - C 736dtn Color Laser Printer にも：トレイモジュール設置マニュアル (1 ページ), トレイモジュール設置マニュアル (2 ページ), クイック・リファレンス (2 ページ), 接続マニュアル (5 ページ), 印刷マニュアル (3 ページ), パンフレット＆スペック (6 ページ), メディア・マニュアル (3 ページ), メニューマップ (3 ページ), 用品マニュアル (2 ページ), インストール (2 ページ), 情報マニュアル (1 ページ), クイックマニュアル (4 ページ)

Color misregistration

Example

ABCDE

Adjusting the color alignment

Make sure that the printer is turned off.

From the printer control panel, press and hold

Release both buttons when the clock appears.

The printer performs its power-on sequence, and then Config Menu appears.

Press the down arrow button until

Press

again to print the alignment page.

Press the down arrow button until

From the printed sheet, find the straightest of the 20 lines beside the letter A.

Press the left arrow button or the right arrow button until that number is displayed, and then press

Submitting selection appears.

Repeat steps 6 through 8 to align sets A through L.

Press

Press the down arrow button until

Resetting the Printer appears briefly, followed by a clock, and then Ready appears.

Cause

Color has shifted outside of the appropriate

area or has been superimposed over another

color area.

and the right arrow button while turning the printer on.

Color Alignment appears, and then press

Set A appears, and then press

Exit Config Menu appears, and then press

Print quality guide

Page 3 of 8

Solution

Recalibrate the printer.

•

Perform Color Adjust from the Quality

Remove and reinstall the

photoconductor.

Adjust the color alignment. For more

information, see "Adjusting the color

alignment" on page 3.

Note: If you have not resolved the issue,

then recalibrate again. If necessary, adjust

the color alignment again.