- ページ 5
プリンター Lexmark 260d - E B/W Laser PrinterのPDF クイック・リファレンスをオンラインで閲覧またはダウンロードできます。Lexmark 260d - E B/W Laser Printer 10 ページ。 Setup sheet
Lexmark 260d - E B/W Laser Printer にも: セットアップシート (2 ページ)
Clearing jams
Avoiding jams
The following hints can help you avoid jams:
•
Use only recommended paper or specialty media.
•
Do not load too much paper. Make sure the stack height does
not exceed the indicated maximum height.
•
Do not load wrinkled, creased, damp, or curled paper.
•
Flex, fan, and straighten paper before loading it.
•
Do not use paper that has been cut or trimmed by hand.
•
Do not mix paper sizes, weights, or types in the same stack.
•
Store the paper in an appropriate environment.
•
Do not remove trays while the printer is printing. Wait for
the
light to come on before removing a tray. The light
sequence for loading paper also signals that the tray may be
removed:
Load paper
- On
•
Do not load the manual feeder while the printer is printing.
Wait for the
light to come on.
•
Push all trays in firmly after loading paper.
•
Make sure the guides in the trays are properly positioned, and
are not pressing too tightly against the paper.
•
Make sure all paper sizes and paper types are set correctly.
•
Make sure all printer cables are attached correctly. For more
information, see the setup documentation.
Accessing jam areas
Open doors and remove trays to access jam areas. The following
illustration shows possible jam areas:
1
2
3
4
5
6
Access point Description
Push the button to open the front door. Inside
1
this door is the unit housing the toner cartridge
and photoconductor kit.
2
Standard exit bin
3
Front door
4
Manual feeder door
5
Standard 250-sheet tray (Tray 1)
6
Optional tray (Tray 2)
7
Rear door
Understanding jam lights and
access locations
The following table lists the jam lights and messages and provides
brief instructions for how to access each jam. More detailed
instructions follow.
Note: The jam messages listed appear on the virtual display of the
Embedded Web Server.
200.yy Paper jam
Clearing jams
5
200.yy Paper jam
7
- On
- On
- On
Try one of the following:
•
Remove Tray 1.
•
Open the front door, and then remove the photoconductor kit
and toner cartridge unit.
201.yy Paper jam
- On
- On
- On
Open the front door, and then remove the photoconductor kit and
toner cartridge unit.