- ページ 2
ヘッドフォン Avantree BTHS-063のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Avantree BTHS-063 6 ページ。 Stereo wireless headphones
Avantree BTHS-063 にも： ユーザーマニュアル (19 ページ)
ページを印刷する
Important safety instruction
If used in the correct method, this design and production of this product can ensure your personal safety
completely. However, any inappropriate use may lead to potential risk and danger of electric shock or fire
hazard. Please read all the safety instructions before installing and using the product. In particular, attention
shall be given to the following information:
1. It needs to be stored or used in the ambient temperature.
2. It shall not be placed in water or wet locations.
3. It can't be disposed randomly for it may cause environmental pollution.
4. Without approval, It shall not be disassembled or repaired.
5. The built-in lithium battery can't be disposed in the fire or other places to prevent causing fire hazards.
6. It shall be cleaned with dry cloth.
7. Whenever there is damage, it needs to be repaired by professional personnel.
Charging the battery
Fully charge the battery for about 3.5 hours before using the battery for the first time.
1. Plug the smaller end of USB charging cable into the Micro-USB interface of the connector.
2. Next, plug the other end of USB charging cable into other power charging devices or a computer with the
power on.
Status
Low battery
Charging
Fully charged
Package content
1. Wireless headphone
2. Micro USB charging cable
3. 3.5mm audio cable
4. Quick user guide
5. PU bag
Earphone indicator
1.LED Charging indicator
2.Charging Port
3.Volume-/Previous Track
4. Volume+/Next Track
5. LED Indicator
6.Power Button
7．AUX Port
8.MicroPhone
LED indicator
When power is less than 10%, the battery voltage will lower 3.3V,
then there will be a voice prompt "dududu", while the RED LED
flashes twice per second---this alarm occurs every two minutes.
when the voltage is lower 3.1V,the earphone will shut down
automatically
The red light solid on.
The red indicator will go out .