- ページ 2

プリンター Lexmark 360dn - E B/W Laser PrinterのPDF 補足マニュアルをオンラインで閲覧またはダウンロードできます。Lexmark 360dn - E B/W Laser Printer 5 ページ。 Lexmark laser printer setup installation
Lexmark 360dn - E B/W Laser Printer にも: トラブルシューティングマニュアル (8 ページ), セットアップとインストール (2 ページ)

Lexmark 360dn - E B/W Laser Printer 補足マニュアル
Jam message numbers and how to access each
jam
Jam
To access the jam
number
200
Try one or more of the following:
Remove Tray 1.
Open the front door, and then remove the
photoconductor kit.
201
Open the front door, and then remove the
photoconductor kit.
202
Open the front door, and then open the rear door.
231
Open the front door, and then open the rear door.
233
Remove Tray 1, and then depress the lever.
Note: For alternative access to the jam, open the front
door, and then open the rear door.
234
Try one or more of the following:
Open the front door, and then open the rear door.
Remove Tray 1, and then depress the lever.
235
Remove the jam from the standard exit bin.
242
Remove Tray 2.
251
Open the multipurpose feeder door.

200 paper jam

1
Remove the tray from the printer.
2
Remove the jam if you see it here.
3
If you do not see it, open the front door, and then remove the
photoconductor kit and toner cartridge (unit).
2
Note: When the photoconductor kit and toner cartridge are
together, they are called a unit.
4
Lift the flap in front of the printer, and remove any jammed
sheets.
5
Align and insert the unit.
6
Close the front door.
7
Insert the tray.
8
Press
.