- ページ 5

アクセサリー Janam XP30のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Janam XP30 9 ページ。 Xp series
Janam XP30 にも：クイック・スタート・マニュアル (10 ページ), クイック・スタート・マニュアル (15 ページ), クイック・スタート・マニュアル (7 ページ), クイック・スタート・マニュアル (12 ページ)

The XP Series Four-Slot Cradle Kit streamlines your mobile device managment processes. The multi-slot cradle will charge

and synch any mix of XP Series devices.

A. SET UP

We recommend you turn your computer off before connecting the cradle. After following the steps below, turn

the computer back on.

1. Connect the power supply and line cord.

2. Plug the power supply into the power supply receptacle on the cradle.

3. Connect the USB cable to the cradle.

4. Plug the USB cable into one of your computer's USB ports.

5. Plug the cradle's power supply into a power outlet.

B. INSERTING AN XP SERIES DEVICE INTO THE FOUR-SLOT CRADLE

Important: Proper insertion is required to ensure connection. Be sure to insert the device as follows:

1. Place a mobile device in a cradle well (seating the device without trying to join connectors).

2. Tilt-rotate the device forward (bringing top end of unit forward) as you apply downward pressure to fully

insert in cradle well, joining connectors.

Getting Started

XP Series Four-Slot Cradle Kit

Quick Start Guide