プリンター Lexmark 544n - X Color LaserのPDF 補足マニュアルをオンラインで閲覧またはダウンロードできます。Lexmark 544n - X Color Laser 1 ページ。 Enhanced number pad mode
Lexmark 544n - X Color Laser にも：クイック・リファレンス (4 ページ), ファックスマニュアル (4 ページ), ユーザーマニュアル (12 ページ)

ページを印刷する

Match a set of repeating defects on a print job to the marks on one of the vertical lines. The line that best

matches the defects on the print job indicates which particular part may be causing the defect.

For example, the distance between these two

marks represents a repeating defect that

occurs every 34.6 mm (1.4 in.), which means

the photoconductor unit may need to be

replaced.

Note: If the defect appears on the printed

side of a single-sided print job, replace the

toner cartridge before replacing the fuser.

Replace the

developer.

43.9 mm

Replace the

(1.7 in.)

image unit kit.

37.7 mm

(1.5 in.)

Replace the

image unit kit.

78.5 mm

(3.1 in.)

Replace the

image unit kit.

55 mm

(2.2 in.)

Print defects guide

Page 1 of 1

Replace the

photoconductor.

94.2 mm

(3.71 in.)

Replace the

photoconductor.

34.6 mm

(1.4 in.)

Replace the

fuser.

95 mm

(3.74 in.)