- ページ 11

エリプティカル・トレーナー Avari Fitness AvariのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Avari Fitness Avari 18 ページ。 Free stride

OPERATIONAL INSTRUCTIONS
ADJUSTING RESISTANCE
The resistance of the shocks can be adjusted by sliding
SHOCK ADJUSTMENTS
the
ARMS(7, 8).
Position the
the front end of the slot to provide the lowest resistance
and the fastest workout pace. Position the
ADJUSTMENTS
at the back end of the slot to provide
the highest resistance and the slowest workout pace.
CAUTION:
HOT
1. The shocks get
T KNOBS(16)
2. Tighten the
AVARI® Free Stride Stepper.

STORAGE

1. To store the AVARI® Free Stride Stepper, simply keep it in a clean dry place.
2. Grasp the HANDLEBAR(11) and REAR STABILIZER(3) to move the AVARI® Free Stride Stepper,
two people are required for moving.
3. To avoid damage to the electronics, remove the batteries before storing the AVARI® Free Stride
Stepper for one year or more.

MAINTENANCE

The safety and integrity designed into the AVARI® Free Stride Stepper can only be maintained when
the AVARI® Free Stride Stepper is regularly examined for damage and wear. Special attention should
be given to the following:
1. Verify that the Shocks provide resistance.
2. Shocks on steppers get
to cool.
3. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
4. Verify that the CAUTION LABEL(46) is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement CAUTION LABEL(46) if it is missing or damaged.
5. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
6. Worn or damaged components shall be replaced immediately or the AVARI® Free Stride Stepper
removed from service until repair is made.
7. Only Stamina Products supplied components shall be used to maintain/repair the AVARI® Free
Stride Stepper.
8. Keep your AVARI® Free Stride Stepper clean by wiping it off with an absorbent cloth after use.
in the slot on the
SHOCK ADJUSTMENTS
after a few minutes of use.
securely before using the
HOT
during use. To avoid burns, do not touch the shocks until they have time
PEDAL
at
SHOCK
SHOCK
ADJUSTMENT
11