- ページ 11

照明器具 Jandy CPHVLEDS50のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Jandy CPHVLEDS50 16 ページ。 Watercolors led lights underwater large and small light
Jandy CPHVLEDS50 にも：インストレーション・マニュアル (20 ページ)

ページを印刷する

Figure 6.

Removing the Jandy Pro series

WaterColors light Assembly for light

Engine Replacement

7. Plug in the quick disconnect wire (white

for the 12V and red for the 120V) onto the

terminal (AC1) of the light engine.

8. Plug in the quick disconnect wire (black for

the 12V and blue for the 120V) onto terminal

(AC2) of the light engine.

b. Large Light Engine (PCB) Replacement (120V

and 12V)

1. Remove three (3) nuts and washers.

2. Unplug the quick disconnect terminals from

the PCB.

3. Remove the light engine from the light

fixture.

4. Place new light engine into the fixture with

the orientation shown in Figure 8.

Secure the new light engine (PCB) with two

(2) nylon washers and two (2) nuts. Torque

to 12 in-lbs.

6. Plug in the white quick disconnect wire onto

the terminal (J2) of the light engine.

7. Plug in black quick disconnect wire onto

terminal (J6) of the light engine for the 12V

models; or terminal (J3) of the light engine

for 120V models.

Jandy

Pro Series, WaterColors LED Lights

POOL LIGHT

ASSEMBLY

Power

Niche

Cord

Bonding

cable

Installation Manual

POOL WALL

Unscrew pilot screw

and pull top of light

assembly away from

pool wall

Bonding

PILOT SCREW

Push up on

bottom of

light assembly

8a. For 12V models, place a nylon washer on the

stud and place the green ground wire terminal

on the nylon washer and secure both with the

nut. Torque to 12 in-lbs.

8b. For 120V models, place the green ground

wire on the stud and secure with the nut.

Torque to 12 in-lbs.

Reassemble the fixture.

a. If not already done, remove the gasket from

the glass lens and install a new gasket, P/N

R0451101 for the large light and R0400501 for

the small light, on the lens. On the small light,

remove the diverger from the lens.

nOTE

A new lens gasket must be used each time the light is

reassembled.

Page 11

English

SPA LIGHT

ASSEMBLY

Power

Niche

Cord

cable

SPA WA

Uns

and

asse

spa

PIL