- ページ 7

ネットワーク・ハードウェア HIKVISION DS-7108HQHI-K1のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION DS-7108HQHI-K1 17 ページ。 Network/digital video recorder
HIKVISION DS-7108HQHI-K1 にも: クイック・スタート・マニュアル (17 ページ), クイック・スタート・マニュアル (8 ページ)

HIKVISION DS-7108HQHI-K1 クイック・スタート・マニュアル

HDD Installation

Before you start
Before installing a hard disk drive (HDD), please make sure the power is disconnected from the device. A factory
recommended HDD should be used for the installation.
Tools Required: Cross screwdriver.

Bracket Installation

Bracket installation is applicable when you need to remove the cover of the device and install the HDD to the
internal bracket.
Remove the cover from
device by unfastening the
screws on the back and
pushing the cover
backwards.
(Optional) Repeat the steps above to install other HDDs.
Reinstall the device cover and fasten screws.
Front Panel Plug-Pull Installation
Front panel plug-pull installation is applicable when you need to open the device front panel with key and
install the HDD.
Fix mounting ears to HDD
with screws.
Digital Video Recorder Quick Start Guide
Fix the HDD on the bracket
with screws.
To install the HDD on the bracket
of lower layer, uninstall the
bracket of upper layer first.
Unlock the front panel with
the attached key, and press
the buttons on both sides of
the front panel to open it.
1) Connect one end of data cable
2) Connect the other end of data
3) Connect power cable to HDD.
6
Connect the data cable
and power cable.
to the device motherboard.
cable to HDD.
Insert the HDD until it is
fixed firmly.