- ページ 3

屋外噴水 Garden Treasures 24-28のPDF 組み立て説明書をオンラインで閲覧またはダウンロードできます。Garden Treasures 24-28 3 ページ。 2 tier fountain with torch

sure all water is removed and the unit is completely dry.

•

To eliminate the possibility of water damage to areas around your fountain, check for leaks and excessive splashing after the initial setup of your fountain.

It is highly recommended that this fountain be placed in an area that will not be damaged should the area come in contact with liquid.

•

Do not leave your fountain running for extended periods of time when no one is present to observe the performance.

•

Check the area around your fountain on a regular basis to ensure that there is no leakage.

To disassemble pump for cleaning:

Always disconnect pump from the power source before cleaning.

Remove the inlet screen and impeller housing.

Remove the impeller/rotor assembly by gently pulling on the impeller blades.

Use a soft cloth or brush to clean the impeller/rotor assembly area inside the

pump.

Clean the inlet screen, impeller housing and impeller with warm, soapy water.

Reassemble the pump and check for proper operation.

Hints and Troubleshooting

•

If the pump operates but there is no flow, check to make sure that the pump is

fully submerged.

•

If the pump operates but there is no flow, check the supply tubing for kinks and

correct.

•

If the pump operates but there is no flow, and if the pump is submerged and

there are no kinks in the supply tubing, lift the pump out of the water. Remove

supply tubing at pump outlet and clean tubing inside and out if necessary. Put

pump back into water (outlet side up). Once water begins to flow, reattach the

supply tubing.

Pump is replaceable with model # PT-707MIX. Call Customer Service at 1-866-432-5867 for replacement parts.

SAVE THESE INSTRUCTIONS!

Note: Each Garden Treasures fountain product may have variations in texture, finish and appearance from unit to unit. This enhances the beauty of the

product and makes each Garden Treasures fountain product unique. Some products and finishes are intentionally weathered or worn in appearance for

aesthetic design.

Printed in China