- ページ 2
電動工具 Makita HM1801のPDF 技術情報をオンラインで閲覧またはダウンロードできます。Makita HM1801 18 ページ。 Electric breaker
Makita HM1801 にも： 取扱説明書 (10 ページ), 取扱説明書 (8 ページ), 取扱説明書 (20 ページ), 取扱説明書 (12 ページ), 取扱説明書 (8 ページ), 取扱説明書 (12 ページ)
ページを印刷する
R
epair
CAUTION: Disconnect the machine from the power source for safety before repair/maintenance!
[1] NECESSARY REPAIRING TOOLS
Code No.
1R005
Retaining Ring R Pliers RT-2N
1R023
Pipe Ring (for arbor press)
1R045
Gear extractor, large
1R346
Center Attachment for 1R045
1R347
Jig for Tool Retainer Disassembling
1R348
Spring Pin Extractor
1R231
1/4" Hex Shank Bit for M8
1R263
Bearing Extractor
1R269
Bearing Extractor
1R291
Retaining Ring S and R Pliers
784408-3
Socket Bit 13-55
[2] ADHESIVE APPLICATION AND LUBRICATION
[2] -1. Adhesive Application
Apply an appropriate amount of adhesive to the following parts in order to lock them against vibration loosening or
leakage. Be sure to wipe off grease or oil from the parts before adhesive application.
Item No.
10
Brush holder cap (2pcs)
12
Hex socket head bolt M6x22 (4pcs)
16
Hex bolt M5x85 (2pcs)
22
Gear housing complete
83
Hex socket head bolt M12x55 (4pcs)
94
Hex socket head bolt M12x45 (4pcs)
Fig. 1
: ThreeBond 1215
: ThreeBond 1321B or 1324,
or Loctite 242
Gear housing cover
Description
Description
Crank housing
22
Removing Retaining ring R-80 from Crank box
Removing Helical gear 47
Disassembling Tool retainer section
Removing Spring pin 8-40 from Tool retainer shaft
Loosening/ tightening Hex socket head bolt M8x75
Removing Ball bearings
Removing Retaining ring S-20 from Crank shaft
Loosening/ tightening Hex nut M8 that secures Fan 100
Portion to apply adhesive
Threaded portion
Threaded portion
Threaded portion
Figure 8 inlaid portion that contacts Gear housing cover
Threaded portion
Threaded portion
Motor housing B
Field
83
Barrel
Tool holder
94
Use for
Bearing box
16
Motor housing A
P 2 / 18
12
10