- ページ 3

プールフィルター Jandy Versa-Plumb CL340のPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。Jandy Versa-Plumb CL340 14 ページ。 Cartridge pool filters
Jandy Versa-Plumb CL340 にも：設置および操作マニュアル (20 ページ), 設置および操作マニュアル (20 ページ), 設置および操作マニュアル (20 ページ)

WARNING - NEVER OPERATE OR TEST THE FILTER SYSTEM AT MORE THAN 50 PSI

1. Before repositioning valve(s) and before beginning the assembly, disassembly, or adjustment of the clamp,

or any other service of the circulating system; (A) turn the pump off and shut off any automatic controls to

ensure the system is not inadvertently started during servicing; (B) open the air release valve; (C) wait until all

pressure is relieved (air will have stopped flowing from the

air release valve).

2. Whenever installing the filter clamp follow Section 3.4 of this manual, "Clamp Installation".

3. Once service on the circulation system is complete, follow Section 4 of this manual, "Start-up and

Operation".

4. Maintain circulation system properly. Replace worn or damaged parts immediately.

5. Be sure that the filter is properly mounted and positioned according to these installation instructions.

6. Do not pressure test above 50 PSI. Pressure testing must be done by a trained pool professional.

7. SAVE THESE INSTRUCTIONS.

SECTION 1. Safety Information

THIS FILTER OPERATES UNDER HIGH PRESSURE. WHEN ANY PART OF THE

CIRCULATING SYSTEM, i.e., FILTER, PUMP, VALVE(S), CLAMP, ETC. IS SERVICED, AIR

CAN ENTER THE SYSTEM AND BECOME PRESSURIZED WHEN THE SYSTEM IS

RESTARTED. PRESSURIZED AIR CAN CAUSE THE FILTER LID TO BE BLOWN OFF

WHICH CAN RESULT IN DEATH, SERIOUS PERSONAL INJURY OR PROPERTY

DAMAGE. TO AVOID THIS POTENTIAL HAZARD, FOLLOW ALL OF THE

INSTRUCTIONS IN THIS MANUAL.

ATTENTION INSTALLER:

This manual contains important information about the installation, operation and safe

use of this product. This information should be given to the owner/operator of this

equipment.