キッチン＆ランプ; バス備品 Brizo Charlotte T60485のPDF 取付説明書および取扱説明書をオンラインで閲覧またはダウンロードできます。Brizo Charlotte T60485 20 ページ。 Valve trim
Brizo Charlotte T60485 にも：取付説明書 (20 ページ)

ページを印刷する

ASME A112.18.1 / CSA B125.1

ASSE 1016 TYPE T

Write purchased model number here.

For easy installation of your Brizo

you will need:

• To READ ALL the instructions completely

before beginning.

• To READ ALL warnings,care, and

maintenance information.

Table of Contents:

Warranty ............................................................................. Page 2

Installation Instructions ....................................................... Pages 3 - 6

Maintenance ....................................................................... Page 6

Replacement Parts ............................................................. Page 7

THIS VALVE MEETS OR EXCEEDS THE

FOLLOWING STANDARDS:

ASME A112.18.1/CSA B125.1 and ASSE 1016.

CAUTION: This system/device must be set by the

installer to ensure safe, maximum temperature.

Any change in the setting may raise the discharge

temperature above the limit considered safe and

may lead to hot water burns.

NOTICE TO INSTALLER: CAUTION!–As the

installer of this valve, it is your responsibility

to properly INSTALL and ADJUST this valve

per the instructions given. This valve does

not automatically adjust for inlet temperature

changes, therefore, someone must make the

necessary temperature knob adjustments at

the time of installation and further adjustments

may be necessary due to seasonal water

temperature change. YOU MUST inform the

owner/user of this requirement by following the

instructions. If you or the owner/user are unsure

how to properly make these adjustments, please

refer to page 6 and if still uncertain, call us at

1-877-345-BRIZO (2749).

After installation and adjustment, you must affix

75651 Rev. A

MultiChoice

Installation Instructions

Owners Manual

Charlotte™

faucet

T60085

You May Need

your name, company name and the date you

adjusted the temperature knob to the caution label

provided and apply or attach the label to the back

side of the closest cabinet door and the warning

label to the water heater. Leave this Instruction

Sheet for the owner's/user's reference.

WARNING: This thermostatic bath valve is

designed to minimize the effects of outlet water

temperature changes due to inlet pressure and

temperature changes, commonly caused by

dishwashers, washing machines, toilets and

the like. It may not provide protection from hot

water burns when there is a failure of other

temperature controlling devices elsewhere

in the plumbing system, if the temperature

knob is not properly set or if the hot water

temperature is changed after the settings

are made or if the water inlet changes due to

seasonal changes.

WARNING: Do not install a shut-off device on

either outlet of this valve. When this type of

device shuts off the water flow, it can defeat

the ability of the valve to balance the hot and

cold water pressures.

Valve Trim

T60285

T60485

3/4/13