- ページ 8
IP電話 Avaya 1403のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Avaya 1403 19 ページ。 Avaya 1403; 1603 ip phone
Avaya 1403 にも： パンフレット＆スペック (4 ページ), クイック・リファレンス・マニュアル (2 ページ), リファレンス・マニュアル (18 ページ), ユーザーマニュアル (20 ページ), クイック・リファレンス・マニュアル (2 ページ)
ページを印刷する
Navigation
Phone controls
Avaya menu
Redial button
Hold button
Conference button
Transfer button
Drop button
Volume button
Mute button
Speaker button
Feature and Call
appearance
buttons
LED button indicators
Each button has two LEDs, one green and one red, to indicate the status of the button. The status
is identified by whether the LED is turned on, off, or blinking as described in the following tables.
Appearance button LEDs
LED status
Steady green
Slow blinking green
Fast blinking green
Very fast blinking green
Steady red
Off
May 2020
Description
Press the A button to access the Avaya menu. See
Press the button again to exit the Avaya menu.
Press to dial the last number you called.
Press to put the active call on hold.
Press to add another party to an existing call.
Press to transfer a call to another number.
Press to drop the active call. While on a conference call, press Drop to drop the last
person added to the conference call.
Press + or - while active on the handset or speaker to adjust the volume. To adjust the
volume of the ringer, press + or - on the Volume button while the handset and
speaker are inactive.
Press to mute a call in progress. To take a call off mute, press Mute again.
Press to use the speaker phone. To take a call off speaker phone, lift the handset.
There are three buttons that can be programmed by the system administrator as
either Call appearance or Feature buttons. Press a Call appearance button to make
or answer a call or resume a call on hold. Press a labeled feature button to enable or
disable that feature. Typically, two buttons are administered as Call appearance
buttons and one button is administered as a Feature button. The Feature button
provides access to an Avaya call management system feature that has been
administered for your extension. The green LED next to the Feature button indicates if
the feature is currently on or off. If the light is on, the feature is on.
Description
Call appearance is active.
Call appearance is ringing.
Call appearance is on hold.
Conference or call transfer is pending.
Call appearance is selected and will be used when the phone is off the
hook. The indicator remains steady red while you use the call
appearance.
Call appearance is available.
Using IP Office 1403 Phones
Comments on this document? [email protected]
Avaya menu
on page 10.
8